Accessories
Toolbox for Open Frame Bucket
Top makes a tray to hold nuts, bolts & small tools.
Standard: Inside dimensions = 6 1/2" deep x 8" wide x 14 1/4" long
or Large: Inside dimensions = 12" deep x 8" wide x 14 1/4" long.
Bucket Forks
These adjustable "forks" are mounted to the bottom front of the open frame bucket and are perfect for lifting things like pan face signs or plywood into place for installation. Lift up to 300 lbs. when the bucket is unmanned.
Raceway Installation Forks
The raceway forks make putting up those raceway signs a one man operation. They adjust in and out, giving you as much as 10 degrees of adjustment depending on letter size.
Pattern Paper & Banner Spindle
Great for making banner hanging and rolling out wall patterns a one-man operation. Pre-load your banner or channel-letter pattern in your shop. Attach spindle to the bucket. Easy to "dispense" banner or pattern paper as you move along a wall.
Canvas Letter Pockets
Handy for bringing up plastic-molded letters or channel letters, etc. in succession that can be pre-loaded in the 2 ft. canvas pockets. Eyelets on the bag are placed over prongs on the bucket as the pockets are lifted up and the letters removed for installation. Saves trips to the ground.
Bucket Lifting Eye Attachment
We can mount an Eye Attachment on the bottom of the open-frame bucket which is rated for lifting 300 lbs.
Outriggers
For added stability. Mounts on the rear of vans or the center of the vehicle on pickups.
Fluorescent Light Bulb Holder Extension Boom Accessory
Holds a case of fluorescent bulbs onto the extension boom and is adjustable from rung to rung so it works for all length bulbs.
Fluorescent Light Bulb Holder Bucket Accessory
Holds up to a case of fluorescent bulbs. This accessory hooks on the front of the bucket and is easily removable for storage while traveling.
Flip-Down 5-gallon Pail Holder Bucket Accessory
For doing those big painting jobs.
Full Body Harness & Lanyard
Comfortable, heavy-duty, top quality. OSHA required.Strobe Lights (set of 2)
LED Pulsator by Federal Signal SAE Class 1
Wheel Chocks (set of 2)
(9"W x 8"D x 5 3/4"H)
